CS8 PRO DETAILS
CS8 PRO
- 5mega pixel SONY industrial camera
- The 3rd generation IAA auto lifting system
- Dynamic measurement technology
- Basic car body measurement data function
- Mini target (only 134/173 mm)
- 3D teaching video
- Jack-up adjustment function
- Image stabilizing system
- i-toe 1 function for steering wheel adjustment,and i-toe2 function for special SUV adjustment
- Classical cabinet design
- The 2.7-meter-high column supports a standing adjustment working mode, make it more suitable for use in Europe and North America
- Use the high-strength nylon claws and don't worry about damaging your rim
- TEL: +17023261939
CS8 PRO
- 5mega pixel SONY industrial camera
- The 3rd generation IAA auto lifting system
- Dynamic technology(software), works wellon rims with concave-convex designs
- Basic car body measurement data function
- Mini target (only 134/173 mm)
- 3D teaching video
- Jack-up adjustment function
- Image stabilizing system
- i-toe 1 function for steering wheel adjustment,and i-toe2 function for special SUV adjustment
- Classical cabinet design
- The 2.7-meter-high column supports a standing adjustment working mode, make it more suitable for use in Europe and North America
- Use the high-strength nylon claws and don't worry about damaging your rim
- TEL: +17023261939
TECHNICAL PARAMETERS
Measurement Function
Basic Measurement:
| Items | Camber | TOE | Caster | Kingpin(S.A.I.) | I.A | Setback | Thrust Angle | Wheel Offset | Axle Offset |
|---|---|---|---|---|---|---|---|---|---|
| Range | ±45° | ±30° | ±45° | ±45° | ±45° | ±20° | ±30° | — | — |
| Accuracy | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1mm | ±1mm |
Equipment Specifications
| Operating Temperature | -30~50°C |
| Power Requirement | 100~120V(1Ph,50~60Hz) 190~240V(1Ph,50~60Hz) |
| Power Consumption | 300~350W |
| Size of Target | Front:134×134mm Rear:173x173mm |
| Ring Diameter(Four-point clamp) | 11~25'' |
| Ring Diameter(Three-point clamp) | 11~25'' |
| Track Width | 1220~2450mm |
| Wheelbase | 1600~5600mm |
| Rolling Compensation Style | Backward / Forward |
| Camera Resolution | 2592*1944 Single Camera(5.0M x2) |
| Distance from Camera to Turnplate | 1.5m ~ 3m |
Dimensions
FEATURES
Dynamic Technology
Available to pass “suspension clamping test” or “off-center clamp test”.
Auto Lifting System
Measure in a low position and adjust in a high position, people and vehicles are safe
5.0M SONY Camera
High pixel camera makes sure the image more clear and data more accurate, as well as supporting for smaller targets.
Image Stabilization System
The image stabilization system reduces errors from operation and mechanical deformation.
Drive-on Camera
The drive on camera helps guide the proper parking of the vehicle to be aligned, ensuring safety and efficiency.
Voice Broadcast
The voice broadcast makes your job easier,improve your working efficiency.
Support Two Post Lift
The wheel alignment software supports to use for the two post lift and mini scissor lift,meets more customers’ need.
Movable Version
The movable version is more convenient for different work station
TECHNICAL PARAMETERS
Measurement Function
Basic Measurement:
| Items | Camber | TOE | Caster | Kingpin(S.A.I.) | I.A | Setback | Thrust Angle | Wheel Offset | Axle Offset |
|---|---|---|---|---|---|---|---|---|---|
| Range | ±45° | ±30° | ±45° | ±45° | ±45° | ±20° | ±30° | — | — |
| Accuracy | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1′ | ±1mm | ±1mm |
Equipment Specifications
| Operating Temperature | -30~50°C |
| Power Requirement | 100~120V(1Ph,50~60Hz) 190~240V(1Ph,50~60Hz) |
| Power Consumption | 300~350W |
| Size of Target | Front:134×134mm Rear:173x173mm |
| Ring Diameter(Four-point clamp) | 11~25'' |
| Ring Diameter(Three-point clamp) | 11~25'' |
| Track Width | 1220~2450mm |
| Wheelbase | 1600~5600mm |
| Rolling Compensation Style | Backward / Forward |
| Camera Resolution | 2592*1944 Single Camera(5.0M x2) |
| Distance from Camera to Turnplate | 1.5m ~ 3m |
Dimensions
FEATURES
Dynamic Technology
Available to pass “suspension clamping test” or “off-center clamp test”.
3-Point Clamp Tire Type
Nylon jaws protect wheel rims from damage
Dynamic technology(software), works wellon rims with concave-convex designs
Auto Lifting System
Measure in a low position and adjust in a high position, people and vehicles are safe
5.0M SONY Camera
High pixel camera makes sure the image more clear an data more accurate, as well as supporting for smaller targets.
Image Stabilization System
The image stabilization system reduces errors from operation and mechanical deformation,ensuring accurate measurements every time !
i-TOE Function
Support Two Post Lift
The wheel alignment software supports to use for the two post lift and mini scissor lift,meets more customers’ need.
Movable Version
The movable version is more convenient for different work station
ACCESSORIES
STANDARD
OPTIONAL
